Some measurements are required in order for us to properly create your new panels.
Please follow the instructions below to start the panel ordering process.
Color or typestyle of new panels may not match existing panels.
1. Remove the panels you will be replacing, and leave the panels that you wish to keep on the sign.
If you are replacing all of the panels, measure from one end of the tracking to the other and skip to the end of these instructions.
2. Slide the remaining panels all of the way to one side of the sign.
3. Take a measurement from the edge of the last panel to the edge of the tracking.
This is the maximum length of your new panel(s).
Enter this length in inches into the field and press Go:
| 
